Vendor: Cisco
Exam Code: 210-065 dumps
Exam Name: Implementing Cisco Video Network Devices
(CIVND)
Version: DemoDEMO
QUESTION 1
Cisco TMS is unable to manage endpoints and an engineer is required to capture logs to determine the
cause. What is the menu path that the engineer should follow to capture and download logs from Cisco
TMS?
A. Administrative Tools > Diagnostics > TMS Tickets
B. Administrative Tools > TMS Server Maintenance > Download Diagnostic Files
C. Systems > Navigator > Diagnostics > Download Diagnostic Files
D. Systems > Navigator > TMS Logs
Correct Answer: B
QUESTION 2
A Cisco TelePresence VCS displays this alarm: "Root password is set to default." How can this security
warning be addressed?
A. Use the Cisco TelePresence VCS web user interface, choose Administration > User Settings, and
change the root password.
B. Use SSH to log in to the Cisco 300-101 dumps TelePresence VCS as Administrator and issue the command xconfig
root set passwd.
C. Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command set password, and
enter the new password when prompted.
D. Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command passwd, and enter the
new password when prompted.
E. Use the Cisco TelePresence VCS web user interface, choose Administration > System Settings, and
change the root password.
Correct Answer: D
QUESTION 3
A technician is trying to pair a Touch 8 with a Cisco 300-135 dumps TelePresence SX20 endpoint, but the codec is not
automatically listed in the touch panel. What are two possible reasons for this behavior? (Choose two.)
A. The codec firmware version is below version TC 6.1.
B. The codec and the Touch 8 are on separate subnets.
C. Pairing visibility mode is not active on the codec.
D. The codec is not compatible with a Touch 8 device.
E. The Touch 8 is connected via the second Ethernet port on the codec.
Correct Answer: BC
QUESTION 4
Which two methods are used to navigate the menu options of an auto attendant on an MCU? (Choose
two.)
A. KPML
B. DTMF
C. PiP
D. PoP
E. FECC
F. SCCP
Correct Answer: BE
QUESTION 5
Which Cisco Video Surveillance device is responsible for providing video streams to monitors after therespective layouts and views are received by the monitors?
A. Cisco IP Video Surveillance Operations Manager
B. Cisco IP Video Surveillance Virtual Matrix Viewer
C. Cisco Video Surveillance Manager
D. Cisco Video Surveillance Media Server
Correct Answer: D
QUESTION 6
Which two issues does utilizing an IP network storage solution for IP video surveillance help overcome?
(Choose two.)
A. analog to IP conversion
B. large, expandable storage space
C. physical security
D. scalability
E. faster bit rate for storage
Correct Answer: BD
QUESTION 7
Which codec represents video that is supported by Cisco 210-260 dumps TelePresence endpoints?
A. H.263
B. H.323
C. H.264
D. H.262
Correct Answer: C
QUESTION 8
Refer to the exhibit.The numbers on the floor plan represent the horizontal average lux readings for nine different room areas.
Considering Cisco best practices, what can you conclude about the lighting conditions?
A. Only three areas meet the room lighting levels that are recommended by Cisco.
B. Only three areas do not meet the room lighting levels that are recommended by Cisco.
C. All areas meet the room lighting levels that are recommended by Cisco.
D. The areas do not meet the room lighting levels that are recommended by Cisco.
Correct Answer: B
QUESTION 9
An engineer is deploying a Cisco Media Experience Engine 3500 to provide various capabilities for
ingesting and processing video media and production capabilities. Which two advances does the Cisco
MXE 3500 provide? (Choose two.)
A. automated graphical integration that can embed 70-532 dumps metadata overlays on videos during processing
B. over 2 terabytes of storage for both local and streaming media applications
C. automated ingesting of video files based on watch folders
D. clustering capability of up to 20 resource nodes to handle and balance incoming media requests and
processing
E. live output abilities to provide DV, DVC Pro, DVC Pro 50, and DVC Pro HD format streams
F. ability to create VoD file outputs to WebEx ARF format
Correct Answer: ACQUESTION 10
A customer wants to know the options that are available when using all Cisco TelePresence SX Series
endpoints in a multisite conference that is hosted locally. What are three capabilities of the Cisco
TelePresence SX20 endpoint during a native multisite call? (Choose three.)
A. ability to change the local layout to prominent mode
B. ability to change the layout of remote participants to prominent mode
C. ability to change the Self-View status of remote participants
D. ability to control the camera of remote participants
E. ability to change the contact status of remote participants
F. ability to change the layout of remote participants to multisite mode
Correct Answer: ABD
QUESTION 11
In a Cisco TelePresence MX300 G2, what is the minimum bandwidth for 1080p30?
A. 768 kbps
B. 1152 kbps
C. 1472 kbps
D. 1873 kbps
E. 2560 kbps
Correct Answer: C
QUESTION 12
In this item, you will need to use all information presented to you to successfully answer the question.Refer to the exhibits. An administrator needs to perform a factory reset on a C-Series endpoint. What are
two valid ways to accomplish this task? (Choose two.)
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
E. Exhibit E
Correct Answer: CD
QUESTION 13
The microphone on a Cisco 210-250 dumps TelePresence System 3000 is switching incorrectly to a camera that does not
have an active speaker. What is the first step that an engineer should take to troubleshoot this issue?
A. Check whether the microphone is properly plugged in.
B. Run the microphone calibration procedure.
C. Plug all microphones into the primary codec.
D. Check whether the cable from the microphone is plugged into the correct receptor on the codec.
Correct Answer: B
QUESTION 14
Which three standards are supported for streaming live video on Cisco TCS? (Choose three.)
A. H.265
B. H.261
C. H.264
D. H.263
E. H.262
F. H.270
Correct Answer: BCD
QUESTION 15
What is the main difference between Cisco Jabber and Cisco Jabber Video for TelePresence?
A. Cisco Jabber registers to the Cisco Unified Communications Manager, whereas Cisco Jabber Video for
TelePresence registers to the VCS.
B. Cisco Jabber Video for TelePresence registers to Cisco Unified Communications Manager, whereas
Cisco Jabber registers to the VCS.
C. Cisco Jabber has no video calling capabilities, whereas Cisco Jabber Video for TelePresence has
video capabilities.
D. Cisco Jabber has no presence capabilities, whereas Cisco 210-255 dumps Jabber Video for TelePresence has
presence capabilities.
E. There is no difference between Cisco Jabber and Cisco Jabber Video for TelePresence.
They should not coexist in the same network.
Correct Answer: A
QUESTION 16
A technician enters the diag system normal command for a Cisco TelePresence System endpoint. Which
action must be done in the CLI before entering this command?
A. Logging must be enabled.
B. Calling services must be stopped.
C. All forced upgrades must be cleared.D. The Telephone_Srvr service must be restarted.
Correct Answer: B
QUESTION 17
What is the proper procedure to manually reset a password on a Cisco TelePresence EX Series endpoint
running software version TC7?
A. Use SSH to access the device and use the username "cisco" and the password "TANDBERG."
B. Hold down the mute key on the touch display for 25 seconds and reset the password using the touch
screen.
C. When the device is powered down, hold down the power button until the power light blinks twice, then
press the power button twice.
D. Tap the power button four times within ten seconds and then use Telnet to connect to the device IP
address.
E. Tap the power button five times while the device is powered off and when it boots, use Telnet to
connect to the device within 60 seconds.
Correct Answer: C
QUESTION 18
Refer to the exhibit.A technician is reviewing the search history details on a Cisco TelePresence VCS for a recent call that
failed. What was the cause for the call setup failure?
A. A local call policy rule denied the call.
B. The source alias matched an entry in the registration deny list.
C. The originating caller was not authenticated.
D. The source alias origin is unknown.
Correct Answer: A
QUESTION 19
Which three Cisco TelePresence endpoints support hosting embedded multisite conferences? (Choose
three.)
A. EX60
B. EX90
C. C20
D. C90E. SX10
F. SX20
G. Jabber Video for Cisco 200-150 dumps TelePresence
Correct Answer: BDF
